Storm, lightning & power surge repairs · Greater Sydney

Storm Damaged Your C-Bus or Smart Home System? We Can Get It Working Again.

A storm, lightning strike or power surge can knock out a home automation system in seconds. Keypads go dark, lights stop responding and scenes disappear. Cync Electrical & Automation specialises in assessing and repairing storm-damaged C-Bus, Dynalite, KNX and smart home systems across Greater Sydney. We give you a clear damage report for your insurer, usually on the day we visit.

★★★★★ 5.020 Google reviews
C-Bus ApprovedClipsal C-Bus Approved Installer
Lic. 487170CLicensed NSW electrical contractor
Same-day reportInsurance-ready, usually that evening

What to look for

Signs your automation system has been damaged by a storm

Storm damage doesn't always look dramatic. Watch for any of these after a storm, a blackout or a power surge:

Keypads are dead or unresponsive

No backlight, no LEDs, or buttons do nothing.

Some lights work and others don't

Whole groups or rooms stop responding.

Lights stuck on, stuck off, or flickering

Dimmers no longer dim smoothly.

Scenes and timers have stopped working

Morning, evening or away modes don't run.

Your app or touchscreen can't connect

Apple Home, iPads, wall panels or the C-Bus app show the system offline.

Burning smell or heat from the switchboard

Turn off the power and call us straight away.

Tripped safety switches or circuit breakers

Breakers that won't reset or keep tripping.

Blinds, gates, fans or AC integrations have stopped

Even though the devices themselves have power.

Error lights on dimmer or relay modules

Fault indicators showing in the switchboard.

Surges can damage the network as well as individual devices. That's why a system can seem partly working while the fault spreads further than it looks.

The cause

Why storms damage automation systems

C-Bus and other automation systems run on a low-voltage control network connected to every keypad, sensor and module in the house. A nearby lightning strike or a grid surge can travel through that network and damage power supplies, dimmers, relays and keypads all at once.

Older systems and systems without proper surge protection are especially at risk.

How we help

Our storm damage process

Fast call-out

Call or book online. Storm jobs get priority, and we aim to be on site within days, not weeks.

On-site assessment

We test the whole system, network, power supplies, modules and keypads to find every damaged component, not just the obvious ones.

Same-day damage report

You get a detailed written report, usually that evening. It covers what was damaged, the likely cause, and an itemised repair or replacement cost.

We deal with your insurer

We liaise with your insurance company or assessor directly, answer their technical questions, and give them the evidence they need. That takes the stress off you.

Repair or upgrade

Once it's approved, we repair or replace the damaged equipment and reprogram your scenes, schedules and integrations.

Tested and handed back

We test everything, walk you through the system, and recommend surge protection to reduce the risk next time.

Case study

Storm-damaged C-Bus system, Northern Beaches

A severe storm swept through on a Saturday night and left a Belrose family's C-Bus system badly damaged. Lights and keypads across the home stopped working.

  1. Day 1 (Monday)We were on site for a full assessment, and the client had a detailed damage report that evening.
  2. Over the following daysWe liaised directly with the client's insurance company, giving the technical detail and costings they needed to approve the claim.
  3. Day 11We replaced and recommissioned the entire C-Bus system in a single day.

The result

Just under two weeks after the storm, the family had a fully working, brand-new automation system. It was frustrating to begin with, but they came out of it with modern equipment that will last them for years to come, and a smooth, hands-off claims process.

Why Cync

Why Sydney homeowners choose Cync Electrical & Automation

  • Clipsal C-Bus Approved Installer with 10 years of C-Bus experience.
  • 100+ systems serviced, including systems other electricians said had to be fully replaced.
  • We also repair Dynalite and KNX systems, plus Apple Home and HomeKit integrations.
  • Insurance-ready reports written by a licensed NSW electrical contractor.
  • Serving homes and businesses across Greater Sydney, including the Northern Beaches, North Shore, Hills District and Eastern Suburbs.
  • 5.0 stars from 20 Google reviews. Available 7 days, 6am to 6pm.

FAQs

Storm damage FAQs

Will my insurance cover storm damage to my C-Bus system?

Many home and contents policies cover storm, lightning and power surge damage, but every policy is different. We give you a detailed report and liaise with your insurer to support your claim. Check your policy or ask your insurer about your cover.

Can my system be repaired, or does it need replacing?

It depends on what's been damaged. Often only some modules or keypads need replacing. If the damage is widespread or the system is old, a full replacement can be the better value, and insurance may cover it.

How quickly can you come out?

We prioritise storm-damaged systems and aim to get to you as soon as possible after you call. Call 0422 253 379 for our next available time.

Is it safe to keep using my system after a storm?

If you can smell burning, see scorch marks, or breakers keep tripping, turn off the power at the switchboard and call us. Otherwise, avoid repeatedly resetting the system until it has been inspected.

Do you work on systems you didn't install?

Yes. Most storm repairs we do are on systems installed by other electricians.

How do I protect my system from future storms?

We can install surge protection at the switchboard and on the automation network to reduce the risk of damage next time.

Book now

Storm knocked out your automation? Don't wait.

Book a storm damage assessment today and get a clear report for your insurer, fast.

Prefer to talk?

Call us and tell us what's stopped working. We'll give you our next available time and what to do in the meantime.

Call 0422 253 379

7 days, 6am to 6pm · Greater Sydney